Search results

This paper aims to describe a novel hybrid inertial measurement unit (IMU) for motion capturing via a new configuration of strategically distributed inertial sensors, and a calibration approach for the accelerometer and gyroscope sensors mounted in a flight vehicle motion tracker built on the inertial navigation system.

The hybrid-IMU is designed with five accelerometers and one auxiliary gyroscope instead of the accelerometer and gyroscope triads in the conventional IMU.

Simulation studies for tracking with both attitude angles and translational movement of a flight vehicle are conducted to illustrate the effectiveness of the proposed method.

The cross-quadratic terms of angular velocity are selected to process the direct measurements of angular velocities of body frame and to avoid the integration of angular acceleration vector compared with gyro-free configuration based on only accelerometers. The inertial sensors are selected from the commercial microelectromechanical system devices to realize its low-cost applications.

It is quite universal for high-speed turnouts to be exposed to the wear of the stock rail of the switch rail during the service process. The wear will cause the change of railhead profile and the relative positions of the switch rail and the stock rail, which will directly affect the wheel–rail contact state and wheel load transition when a train passes the turnout and will further impose serious impacts on the safety and stability of train operation. The purpose of this paper is to provide suggestions for wear management of high-speed turnout.

The actual wear characteristics of switch rails of high-speed turnouts in different guiding directions were studied based on the monitoring results on site; the authorized wear limits for the switch rails of high-speed turnout were studied through derailment risk analysis and switch rail strength analysis.

The results show that: the major factor for the service life of a curved switch rail is the lateral wear. The wear characteristics of the curved switch rail of a facing turnout are significantly different from those of a trailing turnout. To be specific, the lateral wear of the curved switch rail mainly occurs in the narrower section at its front end for a trailing turnout, but in the wider section at its rear end when for a facing turnout. The maximum lateral wear of a dismounted switch rail from a trailing turnout is found on the 15-mm wide section and is 3.9 mm, which does not reach the specified limit of 6 mm. For comparison, the lateral wear of a dismounted switch rail from a facing turnout is found from the 35-mm wide section to the full-width section and is greater than 7.5 mm, which exceeds the specified limit. Based on this, in addition to meeting the requirements of maintenance rules, the allowed wear of switch rails of high-speed turnout shall be so that the dangerous area with a tangent angle of wheel profile smaller than 43.6° will not contact the switch rail when the wheel is lifted by 2 mm. Accordingly, the lateral wear limit at the 5-mm wide section of the curved switch rail shall be reduced from 6 mm (as specified) to 3.5 mm.

The work in this paper is of reference significance to the research on the development law of rail wear in high-speed turnout area and the formulation of relevant standards.

In recent years, with the rapid development of the Internet and e-commerce, the online retail business has grown rapidly. E-commerce platforms can track different click data to understand consumer behavior and demand preferences, so as to make better demand forecasts, and strategically share this information with upstream suppliers. When the platform charges a certain fee for the shared data, the suppliers face the question of whether to purchase demand information. This article aims to analyze the influence of price competition and advertising competition on the suppliers' decisions to purchase information and the online platform for data pricing.

By using static game with incomplete information, this paper explores information-sharing strategies of an online platform with two competitive brand suppliers. The authors use Nash game to analyze the suppliers' purchasing information decision and then obtain the optimal information price of the online platform with information-sharing contract.

This paper shows that demand information sharing benefits both the platform and the suppliers. Without information contracts, the online platform is willing to share demand information with at least one supplier. Especially, when the consumer's sensitivity to advertising is larger and the commission fee charged by the online platform is small, the online platforms will share information with only one supplier. Based on the game outcomes between the suppliers, two pricing strategies for information are proposed under which at least one supplier purchases information. If the consumers are less (more) sensitive to advertising competition, pricing strategy of the online platform induces both suppliers (only one supplier) to purchase information.

At present, most of the information-sharing articles are based on the traditional purchase and sale mode. Based on the background of e-commerce, this paper examines the online platform's information-sharing strategies, which has certain innovation. In addition, the results show that the information-sharing strategy of the online platform is affected by both the price and advertising competitiveness, which provides a new expansion and supplement for the information-sharing literature.

The purpose of this paper is to design and construct an amplitude shift keying (ASK) modulator, which, using the digital binary modulating signal, controls a floating memristor emulator (MR) internally without the need for additional control circuits to achieve the ASK modulated wave.

A binary digital unipolar signal to be modulated is converted by a pre-processor circuit into a suitable bipolar modulating direct current (DC) signal for the control of the MR state, using current conveyors the carrier signal’s amplitude is varied with the change in the memristance of the floating MR. A high pass filter is then used to remove the DC control signal (modulating signal) leaving only the modulated carrier signal.

The results from the experiment and simulation are in agreement showed that the MR can be switched between two states and that a change in the carrier signals amplitude can be achieved by using an MR. Thus, showing that the circuit behavior is in line with the proposed theory and validating the said theory.

In this paper, the binary signal to be modulated is modified into a suitable control signal for the MR, thus the MR relies on the internal operation of the modulator circuit for the control of its memristance. An ASK modulation can then be achieved using a floating memristor without the need for additional circuits or signals to control its memristance.

This paper aims to propose a novel multiple transient modeling scheme for the 12-pulse phase-shifting reactor (PSR) rectifier to enhance the efficiency of full-cycle design evaluation.

The detailed time-domain method is adopted to model the rectifier at the behavioral layer. The diode bridges/transformer model at the architecture layer is established by using the switch function and Park transformation. The frequency domain model at the functional layer is derived with the time-varying Fourier decomposition and frequency-shifting. At the component layer, the magneto-thermal characteristics of the rectifier are analyzed with field-circuit and magnetic-thermal coupling methods. A computer-aided design program integrating multiple modeling is also developed for industrial product design.

The function layer modeling is preferred in the initial design stage, making up for the lack of modeling accuracy at the architectural layer and the lack of modeling rapidity at the behavioral layer. The component modeling is irreplaceable for the detailed evaluation in the latter design stage. The multiple modeling scheme based on the four-layer modeling helps the designers achieve high-quality products with a short development cycle.

The singular transient modeling cannot cover the needs of different stages in the full-cycle design evaluation. This paper fills this gap with a novel multiple modeling scheme. Meanwhile, the proposed multiple modeling scheme and developed computer-aided design program provide a great convenience for full cycle design evaluation of the 12-pulse PSR rectifier.

The purpose of this paper is to construct a flux-controlled memcapacitor (MC) emulator without grounded restriction with the binary operation ability. The active first-order low-pass filter (LPF) and high-pass filter (HPF) circuits are constructed by replacing the capacitor with MC.

The output saturation of the active device is innovatively adopted to realize the binary operation of MC with two memcapacitance values. By applying the direct current control voltage together with the input signal, the memcapacitance can be controlled, and hence, cut-off frequency of the filters can be adjusted without changing the circuit structure.

Experiments and simulation results show that the new filter has good frequency selectivity. Both LPF and HPF can change the cut-off frequency by changing the positive and negative control voltage. The experimental and simulation results are in good agreement with the theoretical analysis, which proves the feasibility and validity of the emulator and the filters.

These MC emulators are simple and easy to physically fabricate, which have been increasingly used for experiment. It also provide an effective reference for device miniaturization and low power consumption.

This study aims to explore the relationship between the degree of state-owned enterprises’ (SOEs) mixed reform and the environmental response of enterprises, against the background of actively promoting the reform of mixed ownership in China.

The study is conducted on a sample of A-share listed manufacturing companies in Shanghai and Shenzhen of China, investigated for the period 2015 to 2020. The baseline regression results are robust to a series of robustness and endogeneity tests. To deal with the issue of endogeneity, the technique of instrumental variable method has been applied.

The study confirms the U-shaped effect of the depth and restriction of mixed ownership on SOEs’ environmentally responsive behaviour in the manufacturing industry, especially for lower environmental regulation and higher level of risk-taking firms. The findings indicate that the government, shareholders and other stakeholders of enterprises should not simply consider that the mixed reform is directly promoting or reducing the environmental response behaviour of enterprises.

SOEs should improve their shareholding structures to undermine performance enhancement at the expense of the environment and increase environmentally beneficial behaviours. Regulators and governments should improve the institutional mechanism of environmental regulation and make efforts to promote corporate awareness of the environment.

Although the adoption and implementation of environmentally friendly policies are costly, improved environmental response and other social responsibilities are helpful to corporate long-term growth and reputation and obtain more capital market attention. Therefore, firms would benefit from improving their environmental response to protect nature, as well as to enjoy the economic and social benefits of a better environmental response.

To the best of the authors’ knowledge, there is a lack of studies focussing on the environmental behaviour of SOEs of mixed reform. As the mixed reform in China has come to a climax phase in recent several years, SOEs of mixed reform is an ideal environment for research. The study focusses on manufacturing firms as these firms are more susceptible to contribute to environmental pollution, exploitation of natural resources and labour concerns.

Stainless-clad bimetallic steels (SCBS) are widely investigated in some extremely environmental applications areas, such as polar sailing area and tropical oil and gas platforms areas, because of their excellent anticorrosion performance and relatively lower production costs. However, the properties of SCBS, including the mechanical strength, weldability and the anticorrosion behavior, have a direct relation with the manufacturing process and can affect their practical applications. This paper aims to review the application and the properties requirements of SCBS in marine environments to promote the application of this new material in more fields.

In this paper, the manufacturing process, welding and corrosion-resistant properties of SCBS were introduced systematically by reviewing the related literatures, and some results of the authors’ research group were also introduced briefly.

Different preparation methods, such as rolling composite, casting rolling composite, explosive composite, laser cladding and plasma arc cladding, as well as the process parameters, including the vacuum degree, rolling temperature, rolling reduction ratio, volume ratios of liquid to solid, explosive ratio and the heat treatment, influenced a lot on the properties of the SCBS through changing the interface microstructures. Otherwise, the variations in rolling temperature, pass, reduction and the grain size of clad steel also brought the dissimilarities of the mechanical properties, microhardness, bonding strength and toughness. Another two new processes, clad teeming method and interlayer explosive welding, deserve more attention because of their excellent microstructure control ability. The superior corrosion resistance of SCBS can alleviate the corrosion problem in the marine environment and prolong the service life of the equipment, but the phenomenon of galvanic corrosion should be noted as much as possible. The high dilution rate, welding process specifications and heat treatment can weaken the intergranular corrosion resistance in the weld area.

This paper summarizes the application of SCBS in marine environments and provides an overview and reference for the research of stainless-clad bimetallic steel.

Despite menswear is gaining a significant relevance in terms of retail sales, it represents a neglected topic within the academic literature. Therefore, this paper aims at providing a better understanding of the formal menswear market by developing a tailor-made classification model for the identification of retailers' clusters and at discovering the critical success factors (CSFs).

This research looked at most formal high-end menswear retailers in Italy adopting a methodology based on the Analytic Hierarchy Process and multiple case studies. Thirty interviews were conducted with experts, managers and shopkeepers from case studies.

The study develops for the first time a classification framework of formal high-end menswear retailers and a matching matrix to jointly analyse retailers' clusters and customer profiles in Italy. The results identify the CSFs pursued by menswear retailers and highlight the existence of four clusters of retailers (Differentiated Fashion Firms; Formal Menswear Leaders; Tailoring Firms and Luxury Brands) and seven customer profiles (Habitual Professionals, Special Events, Young People, Occasional Professionals, Foreigners, VIPs and Fashionistas).

The formal high-end menswear represents one of the most traditional Italian heritage markets while being almost ignored in the academic literature. Thus, the value of this research lays in deepening our understanding of this market from the retailers' perspective, by providing for the first time a taxonomy of its players and contributing to identifying the CSFs and the main customer profiles.

To attain green economic efficiency, small, micro and medium-sized firms must follow environmental paradigms. This research aims to discover the relationship between green intellectual capital, green entrepreneurial orientation, green marketing, green organizational culture and competitive advantage strategies to attain sustainable manufacturing business success.

Today, many companies have accepted their responsibilities, that their operations should not harm the environment. This paper aims to discover the relationship between green factors and competitive advantage strategies to succeed in sustainable manufacturing. The employees of the large manufacturing firms in China are the sample population of the present investigation. Through simple random sampling, surveys were distributed via email. The present study was a quantitative analysis. The analytical tool utilized here was structural equation modeling and SmartPLS program applications.

The empirical outcomes find that green intellectual capital positively influences competitive advantages and sustainable success in business. In addition, the impact of green entrepreneurial orientation on competitive advantages and sustainable success is positive and significant. The findings illustrated that green marketing is an essential factor in competitive advantage and sustainable success in business. Another point is that green organizational culture positively affects competitive advantages and sustainable success. Finally, competitive advantages have significantly affected sustainable success in business.

The outcomes help specialists enhance their practices to reflect sustainable business efficiency and competitive advantages.

This is the first study that examined businesses' sustainable success and green factors in a comprehensive model and using a specific sample of manufacturing companies based on green technologies.